The Role of Binary and Many-centre Molecular Interactions in Spin Crossover in the Solid State. Part I. Equation for Free Energy

Summary. A formalism has been developed that describes spin crossover equilibrium in the solid state by taking into account the effects of n nearest neighbours of a given molecule on its partition function. In this way binary and many-body interactions of the order n + 1 are included into the theoretical model and represented by non-ideality parameters connected with the splitting of free energy levels. Binary interactions are characterised by the main splittings whereas higher order interactions manifest themselves in asymmetries of splittings within multiplets. The contribution of molecular interactions can also be written in terms of formal excess free energies of the second, third, fourth and higher orders. Simple relationships between excess free energies and parameters of multiplets have been found for binary, ternary and quaternary interactions. This formalism is reduced to that of the model of binary interactions when effects of surroundings are additive leading to equidistant free energy multiplets. Higher order interactions may cause an abrupt spin crossover but in a limited range of compositions around the transition point. The regression of experimental transition curves of one-step spin crossover may yield estimates of excess energies up to the fifth order.     

Synthesis and Crystal Structure of Glycin·3,5-Dihydroxybenzoic Acid

The title compound glycin·3,5-dihydroxybenzoic acid (GDB) has been synthesized and characterized by single-crystal X-ray analysis. It crystallizes in orthorhombic, space group Pca21 with a = 25.513(10), b = 4.668(2), c = 9.150(4)(A), Z = 4, V = 1089.8(8)(A)3, C9H13NO7, Mr = 247.20, Dc = 1.507 g/m3, μ(MoKα) = 0.132 mm-1, F(000) = 520, R1 = 0.0322 and wR2 = 0.0611 for 885 observed reflections (I > 2σ(I)). The title compound is a 1:1 molecular complex of glycin and 3,5-dihydroxybenzoic acid, which is linked by O-H…O and N-H…O hydrogen bonds to form a three-dimensional framework. Test of SHG (second harmonic generation) indicates that NLO generation of the crystal is higher than that of KDP.     

Physically based molecular device model in a transient circuit simulator

Two efficient, physically based models for the real-time simulation of molecular device characteristics of single molecules are developed. These models assume that through-molecule tunnelling creates a steady-state Lorentzian distribution of excess electron density on the molecule and provides for smooth transitions for the electronic degrees of freedom between the tunnelling, molecular-excitation, and charge-hopping transport regimes. They are implemented in the fREEDA™ transient circuit simulator to allow for the full integration of nanoscopic molecular devices in standard packages that simulate entire devices including CMOS circuitry. Methods are presented to estimate the parameters used in the models via either direct experimental measurement or density-functional calculations. The models require 6–8 orders of magnitude less computer time than do full a priori simulations of the properties of molecular components. Consequently, molecular components can be efficiently implemented in circuit simulators. The molecular-component models are tested by comparison with experimental results reported for 1,4-benzenedithiol.     

Monte Carlo simulation of polarizable systems: Early rejection scheme for improving the performance of adiabatic nuclear and electronic sampling Monte Carlo simulations

An early rejection scheme for trial moves in adiabatic nuclear and electronic sampling Monte Carlo simulation (ANES-MC) of polarizable intermolecular potential models is presented. The proposed algorithm is based on Swendsen–Wang filter functions for prediction of success or failure of trial moves in Monte Carlo simulations. The goal was to reduce the amount of calculations involved in ANES-MC electronic moves, by foreseeing the success of an attempt before making those moves. The new method was employed in Gibbs ensemble Monte Carlo (GEMC) simulations of the polarizable simple point charge-fluctuating charge (SPC-FQ) model of water. The overall improvement in GEMC depends on the number of swap attempts (transfer molecules between phases) in one Monte Carlo cycle. The proposed method allows this number to increase, enhancing the chemical potential equalization. For a system with 300 SPC-FQ water molecules, for example, the fractions of early rejected transfers were about 0.9998 and 0.9994 at 373 and 423 K, respectively. This means that the transfer moves consume only a very small part of the overall computing effort, making GEMC almost equivalent to a simulation in the canonical ensemble.     

Tetrakis(thiadiazolo)porphyrazines. 3. Acid-base Properties and Stability of Tetrakis-3,4-(1,2,5-thiadiazolo)porphyrazine in Sulfuric Acid Solutions

AM1 calculations gave the proton affinities of different types of donor sites in tetrakis-3,4-(1,2,5-thiadiazolo)porphyrazine, H₂{[SN₂)₄PA}, and protonation of the meso-nitrogen atoms was found to be favored. A spectrometric study showed that the basicity of the meso-nitrogen atoms of the porphyrazine macrocycle is strongly diminished and these atoms in CF₃CO₂H are involved in an incomplete acid-base interaction (ABI) to give acid solvates, while a complete ABI (protonation) is found only in the presence of sulfuric acid. The basicity constants of the meso-nitrogen atoms were determined spectrophotometrically in CF₃CO₂H-H₂SO₄. The kinetics of decomposition of the macrocyclic chromophore in concentrated sulfuric acid was studied and a possible mechanism for this process was proposed.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 278–287, February, 2005.     

纳米ZrO2的合成对负载Ni催化剂的CH4/CO2重整反应的影响

采用共沉淀法、醇热合成法和干法分别合成了纳米ZrO2（ZrO2 CP、ZrO2 ET和ZrO2 S），用XRD、 BET、SEM等对其结构和表面性质进行表征，以CH4/CO2重整为探针反应研究了不同方法合成的纳米ZrO2负载Ni催化剂的催化性能，并与载体的物化性质进行了关联。实验结果表明，以干法合成的纳米介孔ZrO2 S具有较大的比表面积（133m2/g）和较好的孔径分布(4.9nm)，Ni/ZrO2 S催化剂在CH4/CO2重整反应中表现出较好的催化性能。     

Structure formation and dynamics of water in strong external electric fields

We have performed molecular dynamics computer simulations of water in homogeneous external electric fields which were varied in a wide range of field strengths. The dielectric response is found to be linear up to fields E₀≈0.01 V/Å from where dielectric saturation effects become important. At fields of E₀≈3 V/Å a phase transition into an ordered, ice-like structure is observed, which is stabilized through hydrogen-bonds. With an increasing external electric field, the frequency spectrum of the water dynamics shows a remarkable red shift of the intramolecular modes and a blue shift of the librational motions, where the frequency varies quadratically with the field strength. A simple analytical model is discussed which reproduces the observed behavior.     

Dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes with lanthanum metal

It was found that lanthanum metal caused the dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes to generate the corresponding benzynes and o-quinodimethanes. When o-dihalogen substituted arenes were allowed to react with lanthanum metal in the presence of dienes, the Diels-Alder products between benzyne and dienes were formed in moderate to good yields. Similarly, the Diels-Alder adducts of o-quinodimethane with dienophiles were obtained, in the reaction of α,α′-dibromo-o-xylenes with lanthanum metal in the presence of dienophiles.     

Effect of cerium, holmium and samarium ions on the thermal and structural properties of the HZSM-12 zeolite

The study of the incorporation of rare earth elements as additives in Y zeolites is a very interesting field of research, mainly by its potential application as additives in catalytic cracking process. In this work was studied the thermal and structural properties of cerium, holmium and samarium supported on HZSM-12 zeolite. The obtained materials were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), nitrogen adsorption, thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). TG/DSC/DTA analyses showed that the dehydration temperatures of RE/HZSM-12 zeolites (RE=Ce, Ho, Sm) increase in relation to pure HZSM-12. The acid properties were investigated by pyridine thermo desorption via TG. The results showed two events of mass loss attributed to elimination of pyridine adsorbed on the weak+medium acid sites and on the strong acid sites.     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.